Sealers

Gator Seal Wet & Satin Looks

Description

Gator Seal is made from acrylic based polymers. Gator Seal penetrates deep into the concrete paver and natural stone pores, thus reducing the oil and dirt penetration, as well as protecting them from the corrosion of de-icing salt. Specifically formulated to be used on unsealed surfaces only.

Technical Data Sheet Wet
Technical Data Sheet Satin

Features

  • Easier to clean and maintain
  • Solvent based
  • Coverage 875 sq. ft. / 5 gal.
  • High gloss lustrous finish (Wet Look)
  • Low gloss matte lacquer finish (Satin Look)

 

Gator Seal Resealer

Description

GATOR RESEALER for concrete pavers and natural stones is made from acrylic based polymers. GATOR RESEALER will penetrate the formula of the existing sealer & reactivate the molecules to create a rejuvenated seal to protect the paver surface. Thus reducing the penetration of oil and dirt, as well as protecting them from de-icing salt.

Technical Data Sheet

Features

  • Easy to clean and maintain.
  • Revives look
  • Can be applied over GATOR WET LOOK and SATIN LOOK finishes, keeping original Wet Look or Satin Look finishes
  • Solvent based
  • Non slip formula
  • Makes pavers look more vibrant
  • Can be applied to Gator Satin Look and Wet Look finishes, keeping original Wet Look or Satin Look finishes.

Surebond SB-7000

Description

SB-7000 Joint Stabilizing Sealer is a water-based, single component, self-crosslinking acrylic co-polymer sealer and joint sand stabilizer with outstanding durability. This product can be used inside and outside, on old and new pavements, sealing the surface and stabilizing joint sand at the same time.

Technical Data Sheet

Features

  • Moderately Enhances Surface tone with GLoss Finish
  • Provides Water, Salt, Stain & UV Protection
  • Bonds Joint Sand to Reduce Sand Loss
  • Promotes Easier Cleaning & Maintenance

Surebond SB-1300

Description

SB-1300 Joint Stabilizing Sealer is a water-based, single component, acrylic co-polymer sealer and joint sand stabilizer. This product can be used inside and outside, on old and new pavements, sealing the surface and stabilizing joint sand at the same time.

Technical Data Sheet

Features

  • Preserves & Protects Natural Surface Tone
  • Provides Water, Salt, Stain & UV Protection
  • Bonds Joint Sand to Reduce Sand Loss
  • Inhibits Weed Growth & Insect Infestation
  • Promotes Easier Cleaning & Maintenance

Surebond SB-8700

Description

SB-8700 Wet Look Joint Stabilizing Sealer is an advanced premium acrylic sealer that is ‘rain safe’ 90 minutes after application and will not yellow under exposure to sunlight. It is a 3 in 1 product, it enhances surface tone with semi-gloss finish, protects the substrate surface and stabilizes joint sand. SB-8700 is specially formulated with an antifungal designed to inhibit the growth of mold, moss and algae on the sealer film when applied to horizontal or vertical surfaces. SB-8700 will penetrate the substrate and provide a protective layer on the surface that is resistant to mild acid, alkali, and salt attacks. SB-8700 will increase the stain resistance of the surface and allow easier cleaning, maintenance, and extended wear. 

Technical Data Sheet

Features

  • 3 in 1 Product:  Seals, Enhances & Stabilizes Joint Sand
  • Deeply Enhances Surface Tone with Semi-Gloss Finish
  • "Rain Safe" within 90 minutes
  • Provides Water, Salt, Stain & UV Protection
  • Inhibits Weed Growth & Insect Infestation
  • Added Antifungal Protects Sealer Film from Mold, Moss & Algae