Hohmann & Barnard, Inc. Dur-O-Wal®
Dur-O-Wal® was officially acquired by Hohmann & Barnard on April 23, 2010. A pioneer in the masonry reinforcement industry, Dur-O-Wal established one of the most well-known brands, widely recognized in the masonry construction and architectural communities.
Hohmann & Barnard, Inc. VS Series- PVC Control Joint
- VS Series - PVC Control Joint, is a complete line of polyvinyl chloride control joints suitable for various wall conditions.
- The PVC material conforms to ASTM D 2287 (Type PVC 654-4) with a durometer hardness of 85 (+ or - 5) when tested in conformance with ASTM D 2240
- Length per piece is 4ft.
Hohmann & Barnard, Inc. RS Series- Rubber Control Join
- RS Series is a Rubber Control Joint designed for masonry walls at control joints
- Extruded rubber material
- Rubber material conforms to ASTM D-2000 2AA-805 with a durometer hardness of 80 (+ or - 5) when tested in conformance with ASTM D 2240
- Length per piece is 4ft.
Hohmann & Barnard, Inc. MFL - Metal Flashing
MFL - Metal Flashing can be formed according to job requirements.
- State dimensions when ordering.
- Comes standard with factory formed, hemmed drip edge.
- Hohmann & Barnard manufactures a variety of metal flashing products and accessories to suit numerous job conditions.
- Products include standard sheet flashings bent to custom sizes and shapes, pre-fabricated inside or outside corners, end dams, splice tape and reglets
- There are various product styles, each of which are manufactured per the dimensional requirements of the customer
Dimensions/Gauges:
26 ga. type 304 or 316 stainless steel
16 oz. or 12 oz. copper
Notes:
Lead-coated copper, terne-coated stainless steel or other gauges are available on special order
To use copper flashing with the ENVIRO-BARRIER system warranty, 16 oz. is required.
Byer Steel Rebar
From stock length bundles to the most complex deformed/fabricated rebar, Byer Steel is the region’s premier full-service concrete steel supplier.
Made exclusively at our facility, our A-996 axle grade rebar is manufactured using train axles as its only raw material source and is made from 100% recycled materials. This provides engineers and contractors with the opportunity to develop valuable LEED points, while utilizing rebar equivalent to A-615.
Dimensions:
#4 (1/2") #13 0.668
#5 (5/8") #16 1.043