Give your pavers a bold, rich finish with GATOR SEAL WET LOOK! Made from high-quality acrylic-based polymers, this powerful sealer penetrates deep into concrete pavers, protecting against oil, dirt, de-icing salt, and harsh UV rays. Designed for unsealed surfaces only, it enhances color while providing long-lasting defense. Elevate your hardscape with a sleek, wet-look shine and superior protection!

• Dry cast concrete pavers

• High-gloss
• Vibrant color enhancer
• Joint stabilizer
• Film former
• Easier to clean and maintain
• Solvent-based
• Rain-safe after 90 minutes
• Works between 60°F (16°C) and 85°F (29°C)
• Helps resist corrosion from de-icing salt, ultraviolet rays effects, motor oil and grease stains

Size/ Approx Surface Sealed

1 U.S. gal. (3.78 L)/ 175 sq. ft (16 sq. m.)

5 U.S. gal. (18.9 L)/ 875 sq. ft (80 sq. m.)

Enhance and protect your pavers with GATOR SEAL SATIN LOOK! Formulated with high-quality acrylic-based polymers, this sealer penetrates deep into concrete pavers, shielding them from oil, dirt, de-icing salts, and UV damage. Designed for unsealed surfaces only, it provides a refined satin finish that enriches color while offering long-lasting durability. Keep your hardscape looking fresh and protected with a sleek, natural sheen!

• Dry cast concrete pavers

• Low-gloss
• Vibrant color enhancer
• Joint stabilizer
• Film former
• Easier to clean and maintain
• Solvent-based
• Rain-safe after 90 minutes
• Works between 60°F (16°C) and 85°F (29°C)
• Helps resist corrosion from de-icing salt, ultraviolet rays effects, motor oil and grease stains

Size/ Approx Surface Sealed

1 U.S. gal. (3.78 L)/ 175 sq. ft (16 sq. m.)

5 U.S. gal. (18.9 L)/ 875 sq. ft (80 sq. m.)

Bring your concrete pavers back to life with GATOR SEAL RESEALER! Made from durable acrylic-based polymers, this resealer penetrates and reactivates the existing sealer’s formula, creating a rejuvenated protective layer. It shields your pavers from oil, dirt, de-icing salts, and UV damage, keeping them looking fresh and vibrant. Perfect for maintaining long-lasting protection with ease—restore your paver surface and keep it protected for years to come!

• Dry cast concrete pavers

• Revives look
• Can be applied over Gator Seal Wet Look and Satin Look sealers
• Film former
• Rejuvenates surface
• Easier to clean and maintain
• Solvent-based
• Rain-safe after 90 minutes
• Works between 60°F (16°C) and 85°F (29°C)
• Helps resist corrosion from de-icing salt, ultraviolet rays effects, motor oil and grease stains

Size/ Approx Surface Sealed

1 U.S. gal. (3.78 L)/ 175 sq. ft (16 sq. m.)

5 U.S. gal. (18.9 L)/ 875 sq. ft (80 sq. m.)

SB-7700 Joint Stabilizing Sealer is a premium, water-based acrylic co-polymer designed to provide outstanding durability and protection for paver surfaces. Ideal for both new and old installations, this versatile sealer works on horizontal and vertical surfaces to stabilize joint sand and protect your pavement with just one application.

SB-7700 is perfect for creating a long-lasting, professional finish on concrete, pavers, and masonry surfaces. Whether you’re sealing a new or restored surface, SB-7700 offers a semi-gloss finish that enhances the aesthetic while minimizing the risk of weathering and deterioration. For easy cleaning and long-term performance, make SB-7700 your go-to solution for joint stabilization and surface protection.

Safe to use on old or new surfaces in both inside and outside environments including: 

• concrete and clay pavers
• flat and stamped concrete
• masonry
• natural and manufactured stone
• segmental retaining wall blocks
•  concrete walls and exposed aggregate 

Ideal for shaded areas, pool decks and outdoor showers where mildew, fungus and algae are a concern.  

Not recommended for 

• granite
• marble
• asphalt
• glazed or ceramic tile 

Test first to verify performance and appearance before applying.

• Dual Protection: Stabilizes joint sand while providing surface protection against salts, acids, and corrosive chemicals.
• Breathable Formula: Won’t trap moisture or efflorescence, making it safe for use right after installation.
• Enhanced Appearance: Moderately enhances the surface with a semi-gloss finish and provides easy stain resistance for low-maintenance upkeep.
• Mold & Algae Prevention: Special antifungal agents inhibit the growth of mold, moss, and algae on the sealer film.
• Weather-Resistant: Freeze-resistant to -60°F (-51°C) and stable up to 180°F (82°C), ensuring lasting protection in various climates.
• Safe & Compliant: Non-hazardous and VOC/EPA compliant for safe use.

With joint stabilization

1 U.S. gal./ 80-120 sq. ft.

Without joint stabilization

1 U.S. gal./ 150-300 sq. ft.

Coverage based on one coat.  Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature and humidity.

SB-1300 Joint Stabilizing Sealer is a high-performance, water-based acrylic co-polymer designed to protect and stabilize your paver surfaces. Suitable for both new and old installations, it works on horizontal and vertical surfaces to provide superior surface protection while stabilizing joint sand with just one easy application.

SB-1300 is perfect for protecting and preserving the aesthetic of pavers, concrete, and masonry surfaces, while also stabilizing joint sand. Whether you’re sealing a new or restored surface, this sealer locks in a clean, natural look while offering durable, long-term protection. Make cleaning and maintenance easier with SB-1300 Joint Stabilizing Sealer!

Safe to use on old or new surfaces in both inside and outside environments including: 

• concrete and clay pavers
• flat and stamped concrete
• masonry
• natural and manufactured stone
• segmental retaining wall blocks
•  concrete walls and exposed aggregate 

Ideal for shaded areas, pool decks and outdoor showers where mildew, fungus and algae are a concern.  

Not recommended for 

• granite
• marble
• asphalt
• glazed or ceramic tile 

Test first to verify performance and appearance before applying.

Dual Action: Stabilizes joint sand and offers surface protection against salts, acids, and corrosive chemicals, minimizing weathering and deterioration.

Breathable Formula: Can be applied immediately after installation, allowing moisture and efflorescence to escape without trapping them.

Clean, Natural Look: Enhances the natural beauty of your pavers with a matte finish while providing stain resistance for easier maintenance.

Mold & Algae Resistance: Formulated with an antifungal agent to help prevent mold, moss, and algae growth on the sealer film.

Safe & Compliant: Non-hazardous and VOC/EPA compliant for worry-free use.

Extreme Weather Protection: Freeze-resistant to -60°F (-51°C) and stable up to 180°F (82°C) to withstand various environmental conditions.

With joint stabilization

1 U.S. gal./ 80-120 sq. ft.

Without joint stabilization

1 U.S. gal./ 150-300 sq. ft.

Coverage based on one coat.  Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature and humidity.

SB-8700 Wet Look Joint Stabilizing Sealer is a high-performance, solvent-based acrylic sealer that provides exceptional protection and an eye-catching wet look for your surfaces. 

Designed for outdoor use on both new and old paver installations, this advanced formula stabilizes joint sand and enhances the overall appearance of your pavers with just one application.

SB-8700 Wet Look Joint Stabilizing Sealer not only stabilizes joint sand but also adds a stunning, semi-gloss finish to your surfaces, elevating their overall look. Perfect for both new and restored surfaces, this sealer is your solution for maintaining a durable, beautiful finish that’s easy to clean and resistant to weathering. Ideal for pavers, concrete, and other masonry surfaces, SB-8700 ensures your surfaces look great and last longer.

Safe to use on old or new surfaces in both inside and outside environments including: 

• concrete and clay pavers
• flat and stamped concrete
• masonry
• natural and manufactured stone
• segmental retaining wall blocks
•  concrete walls and exposed aggregate 

Ideal for shaded areas, pool decks and outdoor showers where mildew, fungus and algae are a concern.  

Not recommended for 

• granite
• marble
• asphalt
• glazed or ceramic tile 

Test first to verify performance and appearance before applying.

Rain Safe in 90 Minutes: Protects your surfaces almost immediately after application, making it perfect for any weather conditions.

No Yellowing: The formula is specially designed to resist yellowing under sunlight, maintaining a fresh, vibrant look.

Breathable & Efflorescence-Free: Can be applied right after installation, as it allows moisture to escape and prevents trapping efflorescence.

Surface Protection: Defends against salts, acids, and corrosive chemicals while minimizing overall surface deterioration and weathering.

Enhanced Appearance: Provides a deep, wet-look finish with a semi-gloss sheen, enhancing the tone of your pavers and improving stain resistance for easy cleaning.

Mold & Algae Prevention: Formulated with an antifungal agent to inhibit the growth of mold, moss, and algae on the sealer surface.

Durable & Weather-Resistant: Freeze-resistant to -60°F (-51°C) and stable up to 180°F (82°C) to withstand harsh environmental conditions.

With joint stabilization

1 U.S. gal./ 80-120 sq. ft.

Without joint stabilization

1 U.S. gal./ 150-300 sq. ft.

Coverage based on one coat.  Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature and humidity.

GATOR SHAMPOO effectively removes ground-in dirt from concrete pavers, wet cast, and natural stones. It restores surfaces to their natural color, leaving pavers, patio slabs, walls, and stones looking clean and vibrant. Safe for polymeric sand joints and surrounding vegetation, GATOR SHAMPOO cleans without causing any damage.

• Concrete pavers
• patios
• slabs
• walls
• wet cast and natural stones

• Removes penetrated dirt
• Restores the pavers to its natural color
• No muriatic acid in product
• No hydrochloric acid in product
• Washes off with water
• Will not affect grass, flowers or plantation

Size/ Approx Surface Sealed

1 U.S. gal. (3.78 L)/ 375 sq. ft (35 sq. m.)

5 U.S. gal. (18.9 L)/ 1900 sq. ft (175 sq. m.)

GATOR EFFLORESCENCE CLEANER removes efflorescence stains trapped in the pores of concrete pavers and natural stone, restoring their clean, vibrant appearance. This essential step ensures that sealer can penetrate deeper into the now-clean surface, providing stronger protection and a longer-lasting finish.

• Concrete pavers
• Slabs
• Natural stones

• Removes efflorescence from the surface of concrete pavers, wet cast and natural stones
• Cleans pavers prior to sealing
• Removes penetrated dirt
• Restores pavers to their natural color
• No hydrochloric acid in product
• Washes off with water

Size/ Approx Surface Sealed

1 U.S. gal. (3.78 L)/ 200 sq. ft (18 sq. m.)

5 U.S. gal. (18.9 L)/ 1000 sq. ft (93 sq. m.)

EF-Fortless is a powerful soap solution designed to melt away efflorescence and haze, while also helping to prevent its return. This mildly acidic formula is perfect for color-sensitive surfaces like brick, block, and mortar, ensuring no discoloration. It’s also safe to use on slurry-dyed blocks and similar substrates.

Simply apply EF-Fortless undiluted and let the foam collapse. Reapply as needed until there’s no more foaming on contact. Unlike traditional cleaners, EF-Fortless doesn't require rinsing on vertical surfaces—making the process even more convenient.

It can be used on all masonry substrates including:

• Brick
• Stone
• Synthetic stone
• Pre-cast concrete
• Designer or colored block

• Helps control efflorescence return
• Safe for glass surfaces
• No need for a pressure washer
• Boosts productivity
• Reduces liability

Coverage rates will vary based on severity of build-up. Proper testing will determine actual coverage rate.

SureStrip is an advanced, ready-to-use stripper designed to remove acrylic, acrylic latex, polyurethane, and other resin coatings and sealers. It also works as a spot cleaner to remove paint spots. Ideal for outdoor use on horizontal surfaces, SureStrip features Clean Rinse Technology, making it easy to rinse away old sealer and stripper residue with a low or high-pressure washer. Perfect for most Surebond film-forming sealers.

SureStrip should not be diluted and is not suitable for use with SB-4000, SB-4400, SB-5000, SB-6400, SB-6700, or SB-6750.

Safe to use on old or new surfaces in both inside and outside environments including: 

• concrete and clay pavers
• flat and stamped concrete
• masonry
• natural and manufactured stone
• segmental retaining wall blocks
•  concrete walls and exposed aggregate 

Ideal for shaded areas, pool decks and outdoor showers where mildew, fungus and algae are a concern.  

Not recommended for 

• granite
• marble
• asphalt
• glazed or ceramic tile 

Test first to verify performance and appearance before applying.

• Powerful Stripping Technology: Strips Away a Variety of Sealers & Coatings
• Fast Acting: Works in Minutes
• Safe For Most Surfaces: Does Not Damage or Etch Surfaces
• Ready to Use Formula: No Dilution Necessary
• Clean Rinse Technology: Sealer & Stripper Residue Rinses Away Easily

All Surfaces

1 U.S. gal./ 125-250 sq. ft.

Coverage based on single treatment. Some applications may require additional treatments. Coverage rate may vary depending on the surface porosity, texture, severity of staining, application method and local conditions.

NMD 80™ is an advanced detergent-based solution specially formulated to safely and effectively remove mortar smears, efflorescence, and polymeric sand haze from all masonry surfaces. Whether you're working with brick, stone, synthetic stone, pre-cast concrete, or colored blocks, NMD 80™ is your go-to solution for a clean, polished finish.

This powerful cleaner includes buffering ingredients, making it safe for delicate surfaces like glass and anodized aluminum while still tackling tough stains. NMD 80™ requires no respirator when used outdoors, offering an eco-friendly, safer alternative to harsh chemicals.

The formula cleans effectively without the need for scrubbing, saving you time and effort. It even leaves the cream on mortar joints for a flawless appearance. For best results, NMD 80™ works seamlessly with the EC Jet downstream chemical injector, dramatically reducing chemical costs and cleaning time.

Experience a safer, faster, and more efficient way to clean masonry surfaces with NMD 80™ – the future of masonry cleaning technology today!

It can be used on all masonry substrates including:

• Brick
• Stone
• Synthetic stone
• Pre-cast concrete
• Designer or colored block

NMD 80™ is diluted 4 parts water to 1 part NMD 80™. An EC Jet is recommended to ensure both proper dilution and application of NMD 80™. Ideal size of pressure washer for exterior clean: gas powered ranging from 3 to 6 gallons per minute pressure washer not to exceed 3,000 P.S.I.

Coverage rates with NMD 80™ using an EC Jet will vary from 100-200 sq. ft. per gallon depending on the surface porosity, texture, ambient temperature, craftsmanship, severity of mortar smears, and severity of other post construction staining.